Manualshelf

Users Manual Part 2

ManualsBrandsio ManualsElectronicsDual band 4X4 lndoor Access Point (AP) with integrated antenna
21222324252627282930
Indoor & Outdoor Access Points Revision: A0-09
70
CONFIDENTIAL
16.2 Advanced Network interface setup configuration for thick AP
Switch between Ethernet port and fiber port from this screen. Click on the “Edit” option (5) in interface screen as
shown in “Figure 46: Basic overview of the interface configuration screen for thick AP”. A basic overview of the
advanced network interface setup configuration screen is given below:
Figure 51: Basic overview of the advanced network interface setup configuration screen
Follow the steps given below for advanced network interface setup configuration:
Table 37: List of actions for advanced network interface setup configuration
Callout
Name
Description
1.
Advanced Settings
Click on “Advanced Settings” option
2.
Port Mode
Set the port to either Ethernet port mode or to Fiber port
mode. If the mode is set to Fiber port mode, make sure that
the SFP is connected