Manualshelf

Users Manual Part 2

ManualsBrandsio ManualsElectronicsDual band 4X4 lndoor Access Point (AP) with integrated antenna
12345678910
Indoor & Outdoor Access Points Revision: A0-09
46
CONFIDENTIAL
10.2 Advanced Network interface setup configuratio n for thin AP
Switch between Ethernet port and fiber port from this screen. Click on the “Edit” option (5) in interface screen as
shown in “Figure 24: Basic overview of the interface configuration screen”. A basic overview of the advanced
network interface setup configuration screen is given below:
Figure 29: Basic overview of the advanced network interface setup configuration screen
Follow the steps given below for advanced network interface setup configuration:
Table 17: List of actions for advanced network interface setup configuration
Callout
Name
Description
1.
Advanced Settings
Click on “Advanced Settings” option
2.
Port Mode
Set the port to either Ethernet port mode or to Fiber port
mode. If the mode is set to Fiber port mode, make sure that
the SFP is connected