Users Manual Part 3

Indoor & Outdoor Access Points Revision: A0-09
87
CONFIDENTIAL
Callout
Name
Description
have another router handling your network's Internet
connection, enter the IP address of that router instead
8.
Metric
Enter a value that defines the priority of the route. If
mu ltiple routes to the same destination exist, the route with
the lowest metric is chosen
9.
MTU
Enter the MTU size, by default it is set to 1500.
Click “Save & Apply” to save the static IPv4 route configuration or click “Reset” to configure the same again.
Static IPv6 Routes
10.
Add
Click on “Add” option to add a new static route in IPv6
format
11.
Interface
Select the physical network interface through which this
route is accessible from the dropdown list (WAN or LAN)
12.
Target
Enter the IP address of the destination host or network in
IPv6 format to which the route leads.
13.
IPv6-Gateway
Enter the IP address of the gateway in IPv6 format through
which the destination host or network can be reached. If the
current AP is being used to connect network with the
Internet, then your gateway IP is the AP's IP address. If you
have another router handling your network's Internet
connection, enter the IP address of that router instead
14.
Metric
Enter a value that defines the priority of the route. If
multiple routes to the same destination exist, the route with
the lowest metric is chosen
15.
MTU
Enter the MTU size, by default it is set to 1500.
Click “Save & Apply” to save the static IPv6 route configuration or click “Reset” to configure the same again.