Users Manual Part 3

Indoor & Outdoor Access Points Revision: A0-09
75
CONFIDENTIAL
Callout
Name
Description
respect to the selected mode (802 11b/g/g+n). Channel width
parameter is required, if the mode is set to “802.11b/g”
5.
Channel Width
Select the “Channel Width” from the dropdown list
(20 MHz/40 MHz-Lower/40 MHz -Upper). This parameter
is needed only if the mode is set to “802.11g+n”
6.
Channel
Select the “Channel” from the dropdown list. The device
will choose the channel by itself, if “auto” channel is
selected. For 20 MHz channel width, available channels are:
1/2/3/4/5/6/7/8/9/10/11/12/13
For 40 MHz Lower channel width, available channels are:
5/6/7/8/9/10/11/12/ 13.
For 40 MHz Upper channel width, available channels are:
1/2/3/4/5/6/7/8/9.
Available channels in 802.11b/g are:
1/2/3/4/5/6/7/8/9/10/11/12/13
Click “Save & Apply” to save the 2.4 GHz radio configuration of thick AP or click “Reset” to configure the same
again.