Users Manual Part 3

Indoor & Outdoor Access Points Revision: A0-09
78
CONFIDENTIAL
Follow the steps given below and configure the general SSID parameters:
Table 42: List of actions to configure the general SSID parameters
Callout
Name
Description
1.
General Setup
Click on “General Setup” option
2.
VA P Status
Enable or disable the VA P with this option. Once disabled,
the SSID will not be available in the search anymore.
3.
SSID
Enter a unique name for the SSID
4.
Mode
Select the SSID operating mode from the dropdown list
(Access Point/Access Point WDS/Client WDS). If “Client
WDS” option is selected, provide the valid parameters of
Access Point WDS SSID
5.
Network
Select the network interface from the dropdown list
6. Hide SSID
Enable/Disable SSID broadcast with this option. Once
disabled, the SSID will not be available in the search
anymore. The user can still associate with the SSID if valid
authenticated credentials are provided
Click “Save & Apply” to save the general SSID configuration of thick AP or click “Reset” to configure the same
again.