Users Manual Part 3

Indoor & Outdoor Access Points Revision: A0-09
81
CONFIDENTIAL
16.3.4.4 SSID/Advanced settings (2.4 GHz and 5 GHz)
A basic overview of the screen to configure the advanced parameters of SSID configuration is given below:
Figure 59: Basic overview of the screen to configure the advanced parameters of SSID configuration
Follow the steps given below and configure the advanced parameters of SSID configuration:
Table 45: List of actions to configure the advanced parameters of SSID configuration
Callout
Name
Description
1.
Advanced Settings
Click on “Advanced Settings” option
2. Client Isolation
Click on the check box and enable or disable the client
isolation feature. If the feature is enabled, it prevents
client to client communication
3.
Disa ble-Coext
Enable/Disable the co-existence option
4. Fragmentation Threshold
Set the fragmentation threshold value. The supported
range is between 256 to 2346
5. RTS/CTS Threshold
Set the RTS/CTS Threshold value. The supported
range is between 256 to 2347
6.
Wi-Fi Multimedia
Enable/Disable the Wi-Fi Multimedia option
7.
Wi-Fi Multimedia P owe r
Save
Enable/Disable the Wi-Fi Multimedia Power Save
option
8.
Number of Spatial
Streams
Set the number of spatial streams between 1 to 4
9. MIMO
Enable/Disable the MIMO feature. This option is
available only for 5 GHz radio SSID
Note: The MIMO feature is not available in 2.4 GHz radio SSID
Click “Save & Apply” to save the advanced parameters of SSID configuration or click “Reset” to configure the
same again.