Manualshelf

Users Manual Part 4

ManualsBrandsio ManualsElectronicsDual band 4X4 lndoor Access Point (AP) with integrated antenna
1234567
Indoor & Outdoor Access Points Revision: A0-09
106
CONFIDENTIAL
21.4 Outdoor Access Point mounting onto the Wall
To mount the device onto the wall, M5-expansion bolts and foundation bolts are needed along with the mounting
bracket. Refer the image given below:
Figure 83: Items needed for mounting the device to wall
Follow the steps given below and mount the device onto the wall:
1. Attach the mounting bracket to the back side of the AP device as shown in “Figure 79: Mounting bracket
alignment with the 4x4 outdoor AP”.
2. Take the reference from the printed sheet provided along with the mounting bracket and mark the position
of the holes on the wall.
3. Us e the drill machine to drill 2 holes with a drill tool on respective marked positions.