Users Manual Part 4

Indoor & Outdoor Access Points Revision: A0-09
109
CONFIDENTIAL
21.5 Grounding of AP
The AP should be properly grounded upon installment. The IO’s 4x4 AP has a grounding position at the
back side of the device as shown below:
Figure 86: Grounding point of AP
A grounding strap can be made from the ring lug terminal of M4 size and a medium length copper wire of
suggested gauge AWG-6 (4.1 mm).
Insert the grounding wire and flush it till the end of the terminal. Use the crimp tool and reshape or
compress the terminal. Use an M4x10 machine screw and attach the crimped lug with AP.