Users Manual Part 1

Indoor & Outdoor Access Points Revision: A0-09
26
CONFIDENTIAL
5.4 Back View
Back side overview of the outdoor AP is given below:
Figure 10: Back view of the outdoor AP
Information displayed in the above figure is detailed in the table below:
Table 5: List of information displayed in back view of the outdoor AP
Note: The Reset button of outdoor AP is located below the humidity controller cap. Turn the humidity controller cap
in counter clock wise direction and remove it from the access point. Use an appropriate pointed object to press the
button. It serves two functions:
1. Restart: Press and release the Reset button quickly.
2. Restore to Factory Default Settings: Press and hold the Reset button for more than five seconds.
Callout
Name
Description
1.
Thermal Plate (Heat
Transfer)
It helps in heat transfer from the board environment to
Ambient.
2.
Screws for Mounting bracket
This helps in the attachment of mounting bracket and outdoor
AP in case of pole and wall mounting
3.
Humidity controller cap
Cap to control the humidity