Users Manual Part 2

Indoor & Outdoor Access Points Revision: A0-09
72
CONFIDENTIAL
16.3.1 5 GHz radio configuration
This screen provides the user with options to configure the 5 GHz radio parameters such as channel bandwidth,
respective channel or the channel selection process, and the power for the radio signal transmission. Refer the
“Figure 52: Basic overview of the wireless configuration screen for thick AP” and click on Add SSID/Radio
Configuration option (4) to configure 5 GHz radio parameters.
A basic overview of the 5 GHz radio configuration screen is given below:
Figure 53: Basic overview of the 5 GHz radio configuration screen
Follow the steps given below and for 5 GHz radio configuration of thick AP:
Table 39: List of actions for 5 GHz radio configuration of thick AP
Callout
Name
Description
1.
General Setup
Click on “General Setup” option
2.
Radio Status
Enable or disable the 5 GHz radio with this option
3.
Tx Power (dBm)
Enter the “Tx Power” value. The wireless radio signal will
be transmitted with the specified Tx power value. The user
can set the Tx power value from the range of 14 dBm to 23
dBm