Users Manual Part 3

Indoor & Outdoor Access Points Revision: A0-09
101
CONFIDENTIAL
21.2 Mounting of Dual Band 4x4:4 Outdoor Access Point (Pole and Wall)
21.2.1 Assembly-1 of Mounting Bracket
1. Align antenna/enclosure base bracket (item-1) with arm bracket (item-2) as shown below:
Figure 78: Assembly-1 of mounting bracket
2. Ins ert M8x40 bolt (item-3) through the holes of antenna/enclosure base bracket (item-1) and arm bracket
(item-2).
Note: Position the bolt head in the socket of antenna/enclosure base bracket (item-1).
3. Ins ert M8 flat washer (item-4) and M8 spring washer (item-5) on the other side of the M8x40 bolt (item-3)
as shown in the above figure.
4. Use the M8 nut (item-6) and tighten the M8x40 bolt (item-3) with 24 N/m torque.
5. The assembly of antenna/enclosure base bracket (item-1) and arm bracket (item-2) is complete.