Manualshelf

Users Manual Part 3

ManualsBrandsio ManualsElectronicsDual band 4X4 0utdoor Access Point (AP) with integrated/external antenna
21222324252627282930
Indoor & Outdoor Access Points Revision: A0-09
102
CONFIDENTIAL
21.2.2 Assembly-2 of Mounting Bracket
1. Align the open arm end of the 1st ass embly (item-1) with Wall/Pole bracket (item-2).
Figure 79: Final assembly of mounting bracket
2. Ins ert M8x40 bolt (item-3) through the holes of open arm end of the 1st assembly (item-1) and Wall/Pole
bracket (item-2).
3. Ins ert M8 flat washer (item-4) and M8 spring washer (item-5) on the other side of the M8x40 bolt (item-3)
as shown in the above figure.
4. Use the M8 nut (item-6) and tighten the M8x40 bolt (item-3) with 24 N/m torque.
5. The assembly of mounting bracket is complete.