Users Manual Part 3

Indoor & Outdoor Access Points Revision: A0-09
103
CONFIDENTIAL
21.2.3 Mounting Bracket onto the Outdoor Access Point
The 4x4 outdoor AP has four holes on the back side to attach a mounting bracket. The mounting bracket is designed
in such a way that the AP can be mounted on the wall as well as on the pole with the help of an extra clamping bracket
and its attaching parts. The external mounting bracket provides the freedom of movement to the AP in both vertical
and horizontal axis even after the mounting.
The mounting bracket is fixed onto the 4x4 outdoor AP as shown in the figure below:
Figure 80: Mounting bracket alignment with the 4x4 outdoor AP
6. Align the holes of mounting bracket with the holes available at the back side of the 4x4 outdoor AP.
7. Use the supplied screws and fix the mounting bracket with 4x4 outdoor AP.
The mounting instructions of 4x4 outdoor AP is detailed in further sections below.