Specifications

Page
10
/
11
4.3 Patch WIFI modules installed before the notice:
WIFI module installed note:
1. Pleas e press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open a
stencil
2. Take and use the WIFI module, please insure the electrostatic protective measures.
3. Reflow soldering temperature should be according to the customer the main size of the products, such
as the temperature set at 250 + 5 ℃ for the MID motherboard.
About the module packaging, s torage and use of matte rs needing atten
tion are
as follows:
1. The module of the reel and storage life of vacuum pac king: 1). Shelf life: 8 months, storage
environment conditions: temperature in: < 40 ℃, relative humidity: < 90% r.h.
2. The module vacuum packing once opened, time limit of the assembly:
1) check the humidity display value shoul d be less than 30% (in blue), such as: 30% ~ 40% (pink), or
greater than 40% (red) the module have been moisture absorption.
2) factory environmental temperature humidity contro
l: ≦ 30% ℃, ≦ 60% r.h..
3) Once opene
d, the workshop the preservation of life for 168 hours.
3. Once opened, s uch as when not used up within 168 hours:
1) The module must be again to remove the module moisture absorption.
2) The baking temperature: 125 ℃, 8 hours.
3) After baking, put the right am ount of desiccant to seal packages.
ATEN Technology, Inc., dba IOGEAR.