Manual
Table Of Contents
- Package Contents
- System Requirements
- Overview
- Rack Mounting
- Grounding
- Open/Close Console
- Installation
- Connect to a KVM
- External Console Ports (Optional)
- USB External Mouse Port (Optional)
- LCD Configuration
- LCD Adjustment Setting
- Reset Button
- Keyboard Function Keys
- Hotkey Commands
- Mac Keyboard Emulation
- Sun Keyboard Emulation
- Firmware Upgrade
- Upgrade Fail
- Safety Instructions
- Specifications
- Federal Communications Commission (FCC) Statement
- CE Statement
- SJ/T 11364-2006
- Limited Warranty
- Contact
28
29
Firmware Upgrade
Note: In order to perform a rmware upgrade, you
need to use a set of computer that is not con-
nected to the LCD Console.
Step 1
Connect the provided rmware upgrade cable to
the rmware upgrade port of the LCD Console
and the serial port of the computer that you will be
using to perform the rmware upgrade.
Step 2
Connect the power cord to the power outlet and
the LCD Console. Then turn on the LCD Console
by the power switch that’s located in the back of
the LCD Console.
Step 3
Go to www.iogear.com to download the latest
available rmware or the specic rmware that you
wish to upgrade to.
Step 4
Make sure the computer that is connected to
the LCD Console is completely shutdown. Then
Invoke Firmware Upgrade Mode. (Please refer to
Hotkey Commands Section)
Step 5
Extract the le that you have downloaded by using
software such as Winrar. Then double-click on
the execute le to open up the Firmware Upgrade
Utility.