Owner manual

6
Front View
Components
1
2
3
4
5
No. Component Description
1 Reset Switch System Reset: Pressing and holding this switch in for more that
three seconds performs a system reset.
Restore Factory Default Settings: Power off the GCN1000, then
press and hold the reset switch for at least 3 seconds while
reconnecting power.
Note: This will not reset users or passwords
2 10/100 Mbps LED The LED lights ORANGE to indicate a 10 Mbps connection, and
GREEN to indicate a 100 Mbps connection.
3 Link LED Flashes GREEN to indicate that a
Client program is accessing the device.
4 Power LED Lights ORANGE when the GCN1000 is powered and ready to operate.
5 LAN Port The network’s Ethernet cable
connection