Owner manual

8
Package Contents
Computer Preliminary setup
Find your computer’s IP address and default Gateway
1. Go to Start −> RUN
3. Enter CMD in the box
4. [OK] or [Enter]
A command line window opens
5. Type ipconfi g
6. [Enter]
Look for the heading that says Ethernet adapter Local Area Connection:
7. Write down the IP Address and Default Gateway.
If the fi rst three groups of numbers of your IP Address happens to be 192.168.0.
Proceed to Hardware set up
IP Address ....................................................................................................................................
Default Gateway ...........................................................................................................................
Exit the command line by clicking on the “X” on the top right corner of the Command line
window