User's Manual
Table Of Contents
- _GoBack
- FCC Information
- User Notice
- Package Content
- About This Manual
- Chapter 1 - Introduction
- Overview
- Chapter 2 - Hardware Setup
- Chapter 3 - Operation
- Appendix
- Specification - DisplayPort Single View Secure KVM
- Specification - DisplayPort Dual View Secure KVM
- Specification - HDMI Single View Secure KVM
- Specification - HDMI Dual View Secure KVM
- Specification - DVI Single View Secure KVM
- Specification - DVI Dual View Secure KVM
- Limited Warranty
6
Package Content
IOGEAR Secure KVM package consists of:
1 x IOGEAR Secure KVM Switch
1 x Power Cord
1 x User Manual*
Please check to make sure that all of the components are present and are in good order. Please contact
your dealer if anything was missing or damaged in shipping.
Please read this manual thoroughly and follow the installation and operation procedures carefully to
prevent any damage to the switch or to any other devices on IOGEAR Secure KVM installation.
*Please visit our website to download the most up-to-date version of the manual
ATTENTION
If the tamper-evident seals are missing or peeled, avoid using the product and contact your
IOGEAR dealer.
If all front panel LEDs (except for Power LED) ash continuously or the switch’s enclosure
appears to be breached, avoid using this product and contact your IOGEAR dealer.
This Secure KVM Switch is equipped with active always-on chassis intrusion detection
security. Any attempt to open the enclosure will permanently damage, disable the switch,
and void the warranty.
Tamper-evident seal