User's Manual

32
Function Keys
F6 Set:
When you press [F6] an OSD configuration submenu opens. To change a setting, move the highlight bar to the choice you
want, then press [Enter]. On the submenu that appears next, move the highlight bar to the choice you want and press [Enter].
An icon of a pointing finger indicates which choice is the currently selected one.
An explanation of the choices is given in the table (right):
Setti ng Function
Channel Display Duration Determine s how long a Port ID is displayed for. There are two choices: 3 seconds - which displays the Port ID for 3
seconds a fter a port cha nge has taken place; and Always On - which disp lays the Port ID at all times.
Channel Display Postit ion Allows you to position where the Port ID is shown on t he screen. After you hig hlight this item an press [Ent er] , th e
menu disappears and the Port ID is displayed. Use the Arrow Keys, Pg Up, Pg Dn, Home, to position the Port ID
display, then press [Ente r] to lock the position a nd return to the Set submen u.
Channel Display Mode Select how t he Port ID is d isplayed. Th ere are three choices: the Number plug the Name (PN + NAME); the Number
alone (PN); or the Name alone (Name).
Scan Duration Determines how long the display pauses o n each port when it cycles th rough the selected ports in Quick View Sca n
Mode. The available opt ions are: 3, 5,10,15, 20,30, 40, a nd 60 seconds.
Clear t he Name List Clears all Port Names from the Name List. You are asked to confirm before the procedure goes o n. Key in Y, then
press [ E nter] to confirm. While the names are being cleared, a message appears on the display to indicate so. After
the names have bee n cleared, another messag e appears to indicate that the proced ure completed successfully.