Installation guide

10
11
No. Component Description
1 Port LED’s These port selection push buttons each contain 2 LEDs.
An orange LED indicates that a computer is connected to the corresponding •
port.
A green LED indicates that the computer connected to the corresponding •
port has focus.
Simultaneously pressing port LEDs 1 & 2 resets the console keyboard and •
mouse.
Simultaneously pressing port LEDs 15 & 16 on the GCS1716 starts Auto •
Scan mode. See F7: SCAN
2 Reset
Button
Pressing this button performs a system reset. When the system is reset, the
GCS1716 beeps, and then the KVM port LEDs ash in succession until the reset
is completed. After the reset is complete, you can login again.
Note: This button is semi-recessed and must be pushed with a small object,
such as the end of a paper clip or a thin ballpoint pen.
3 USB Port USB peripherals (ash drive, CD-ROM, etc.) plug into this port.