Installation guide

SCREEN

BLANKER

If there is no input from the console for the amount of time set with this function, the

screen is blanked. Key in a value from 1–30 minutes, then press [Enter]. The default

setting of 0 disables this function.

HOTKEY

COMMAND

MODE

Enables / disables the hotkey command function in case a conict with programs

running on the computers occurs.

HOTKEY Sets the keyboard shortcut for invoking Hotkey Mode. Choices are: NUM LOCK + -

(minus) (default), and CTRL + F12.

OSD

LANGUAGE

Sets the language used in the OSD. Choices are: English (default), German, Japa-

nese, Simplied Chinese and Traditional Chinese.

F4: ADM

F4 is an administrator only function. It allows the administrator to congure and control the overall

operation of the OSD. To change a setting double-click it, or use the up and down arrow keys to move

the highlight bar to it then press [Enter]. After you select an item, a submenu with further choices to select

from appears. Double-click an item or move the highlight bar to it then press [Enter]. An icon appears

before the selected item so that you know which one it is. The settings are explained in the following table: