Manual

- 31 -
Symptom Possible Cause Action
Cannot switch ports
by pressing [Scroll
Lock] twice
Keyboard is incompatible with
Scroll Lock invocation.
Poweroffalldevicesontheinstallation;powerofftheswitch;conrm
all KVM cables are properly connected; power on the switch; power
on the computers
Monitor does not
display after KVM
cable set is hot
plugged.
Some graphics cards are incompatible
with cable set hot plugging.
Poweroffalldevicesontheinstallation;powerofftheswitch;conrm
all KVM cables are properly connected; power on the switch; power
on the computers
When switching
ports, the monitor
does not display.
Monitorisneworthisisthersttime
installation.
Switch ports again and wait two or more seconds for the PC’s EDID
to pass to the monitor.
The PC’s EDID has not passed through
to the monitor when switching ports.
Use the [d] hotkey to invoke Video
DynaSync one more time or switch
to another PC to reconnect the switch. See HSM Summary Table,
page 21.