Instruction Manual

33
Starting the Upgrade
1. Run the downloaded Firmware Upgrade Package le – either by double clicking the le icon, or using a
command line to enter the full path. The Firmware Upgrade Utility Welcome screen appears:
2. Read the License Agreement (click the I Agree button).
3. Click Next. The Firmware Upgrade Utility main screen appears. The Utility inspects your installation. All
the devices capable of being upgraded by the package are listed in the Device List panel.
4. As you select a device in the list, its description appears in the Device Description panel. After you have
made your device selection(s), Click Next to perform the upgrade. If you enabled Check Firmware
Version, the Utility compares the device’s rmware level with that of the upgrade les. If the device’s
version is higher than the upgrade version, a dialog box gives you the option to Continue or Cancel.
If you didn’t enable Check Firmware Version, the Utility installs the upgrade les without checking whether
they are a higher level, or not.