Manualshelf

Instruction Manual

ManualsBrandsIOGear ManualsComputer AccessoriesGCS1782G
31323334353637383940
34
35
Upgrade Succeeded
After the upgrade has completed, a screen appears to inform you that the procedure was successful:
Click Finish to close the Firmware Upgrade Utility. After a successful completion, the KVM exits Firm-
ware Upgrade Mode, and resets itself.
Upgrade Failed
If the Upgrade Succeeded screen doesn’t appear, it means that the upgrade failed to complete suc-
cessfully, in which case you should do the following:
1. Power off the KVM by removing the power jack.
2. Invoke Firmware Upgrade Mode by holding down the Port 1 button on the front panel and power
on the KVM. The orange LEDs will ash together.
3. Do the rmware upgrade procedure again.