User Manual

FireWire Installation Cont.
17
ION™ Drive Setup
Step 3. Plug the FireWire
®
6 pin connector into your
computer’s FireWire Port.
Note: if your computer has a 4 pin FireWire
®
or iLink
®
connection please
use a FireWire 4 pin(m) to 6 pin(m) cable. IOGEAR part# G2L13946-6;
or you may pick one up at any local electronics store or catalog reseller.
Step 4. Plug the power adapter into a surge protector.
Step 5. Once complete, turn the ION™ Drive and your
computer on. Your computer will automatically identify the
ION™ Drive and load all necessary drivers.