Owner's manual

15
CEC Commands
Consumer Electronics Control (CEC) allows interconnected HDMI devices to communicate and
respond to one remote control. The formula for CEC mode selection commands is as follows:
CEC Command + Control [Enter]
The following tables show the possible values and formats for the Control command:
Command Description
cec Enable CEC selection
Control Description
off Disable CEC
auto Apply the video source’s CEC to all display output
port 1 Apply the video source’s CEC only to port 1 (default)
The following table shows the available command list:
Command Control Enter Description
cec off [Enter] CEC off
cec auto [Enter] Connect the video source’s CEC with all display output
cec port 1 [Enter] Apply the video source’s CEC only to port 1 (default)
Power On Detection (POD)
The Power On Detection feature is turned on by default.
The formula for Power On Detection commands is as follows:
Power On Detection + Control command [Enter]
For example, to turn off the Power On Detection feature, input the following:
pod off [Enter]
Command Description
pod Power On Detection command
Control Description
on Turn on (default)
off Turn off
Note: Each command string can be separated with a space.
The following tables show the possible values and formats for the Control command: