Installation Guide eSATA 3Gbps 1 external & 1 internal port Low profile PCI Express Host Card GICe711S3W6 1 PART NO.
Table of Contents Introduction 4 Feature 5 Package Contents 6 Software Installation 7 Federal Communications Commission (FCC) Statement 9 CE Statement 11 Limited Warranty 12 Contact 13 3
Introduction The Low Profile PCI Host Adapter can support both Low profile PCI and standard size PCI. The card allows you to upgrade your desktop computer with a 2 port Serial ATA transfer rate of 3 Gb/s. The unit also gives you the option of accessing multiple media sources, such as: Hard Drives, CD-RWs, DVD-ROMs and DVD-RAM.
Features • • • • • • • • • • • • • • • • • External SATA II (eSATA) Connector 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB Supports 1-lane 2.5Gbps PCI Express Hot-plug capability Supports SATA II transfer rate of 3.0Gbps Fully compliant with Serial ATA 1.
Package Contents • • • • • eSATA PCI Express Host Adapter Low profile PCI bracket SATA cable Quick Start Guide Driver CD 6
Software Installation Windows XP Driver Installation 1. Power off the system. Insert the SATA Card into an available PCI slot. Connect the serial ATA cable(s) to the SATA port and serial ATA device(s). Power up the system. 2. Insert the Driver CD into the CD-ROM/DVD drive. 3. When the Windows Set-up screen loads, press F6 in order to specify and add the driver. Press ‘S’ when setup asks if you want to specify an additional device. Press ‘Enter’ and select ‘Silicon Image SiI 3132 SATALink Controller’. 4.
Verify Windows XP Installation For Windows XP 1. Right click on the ‘My Computer’ icon, select ‘Properties’. Left click on the ‘Hardware’ tab, and then select the ‘Device Manager’ button. 2. Double click on ‘SCSI and RAID Controllers’, If there is no yellow ‘! ‘ or ‘ ? ‘ in front of ‘Silicon Image SiI 3132 SATALink Controller’, the driver is functioning properly.
Federal Communications Commission (FCC) Statement Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1. this device may not cause interference and 2. this device must accept any interference, including interference that may cause undesired operation of the device.
CE Statement This device has been tested and found to comply with the requirements set up in the council directive on the approximation of the law of member states relating to EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC and R&TTE Directive 99/5/EC.
Limited Warranty The manufacturer, IOGEAR, makes NO warranty or representation, whether express or implied, regarding the contents, use or suitability of this software, disk or documentation. IOGEAR specifically disclaims any and all warranties regarding the quality and performance of this software, disk or documentation including, but not limited to the implied warranty of merchantability and implied warranty of fitness for a particular purpose.
Contact Toll Free: (866) 9-IOGEAR Phone: (949) 453-8782 23 Hubble Irvine, CA 92618 USA www.iogear.com support@iogear.com ©2007 IOGEAR. All Rights Reserved. PART NO. M0556 IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc. Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc.
About Us FUN IOGEAR offers connectivity solutions that are innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resources. The use of our technology solutions helps reduce electronic waste. HEALTH IOGEAR supports healthy and fit lifestyles. By integrating products with the latest scientific developments, IOGEAR’s solutions enhance the life of end-users.
