Bluetooth Desktop Dock GKMB01 PART NO.
Table of Contents Package Contents ........................................................................................................................ 3 System Requirements ................................................................................................................. 3 Product Overview........................................................................................................................ 3 Overview ......................................................................
Package Contents GKMB01 Bluetooth Desktop Dock main unit Plastic stand/back support Quick Start Guide* Warranty Card Check to make sure that all the components are present and that nothing was damaged in shipping. If you encounter a problem, contact your dealer. Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit, and/or any of the devices connected to it.
3. Mouse USB Port (plug your USB mouse into here) 4. USB cable to computer (plug this cable into the computer to share keyboard and mouse) 5. Mobile device cradle/stand Connecting the Hardware Before using the GKMB01 for the first time, make sure the keyboard and mouse have been connected to the computer at least once (so the computer loads the correct drivers) then follow the steps below: 1. Plug the Bluetooth Dock’s USB cable into the computer.
4. With Bluetooth turned on, the iPad will search for the surrounding devices, and you should see GKMB01 as one of the Bluetooth devices in the range. 5. Select GKMB01 and a message will appear on the iPad screen showing the PIN code. 6. Type the PIN code on the keyboard and press Enter (Note: If you have a problem with the Bluetooth connection, see Clear Bluetooth Pairing and repeat the steps above). 7.
Hotkeys The chart below lists the GKMB01 Hotkey functions. The “+” means hold-down the [Alt] key, and press the second hotkey.
Switching the Keyboard and Mouse focus between devices GKMB01’s default setting for keyboard and mouse focus is port 1, which is the computer port. To switch keyboard and mouse focus to port 2 and enable use with the mobile device wirelessly connected via Bluetooth, press ALT + F2. The LED for port 2 flashes then turns solid, indicating the keyboard focus is now set to the device connected to port 2. To switch to port 3, press ALT + F3.
Keyboard Layout Select the Keyboard Layout for your device, and then go to the next section to program the port with the keyboard layout for that device. Note: The default keyboard layout for all ports is iOS. Set the keyboard Layout To set a keyboard layout for each port on the GKMB01, follow the steps below: 1. From the keyboard, select a port on the GKMB01 by pressing ALT + F2 or ALT + F3. 2. Enable Keyboard Mapping, by pressing ALT + F5. 3.
F8 F8 F9 F9 F10 F11 F12 Windows + E Delete Print Screen/SysRq Scroll Lock End Page Up Page Down Backspace Enter Insert Pause/Break Num Lock F10 F11 F12 Windows + E Delete Print Screen Scroll Lock End Page Up Page Down Backspace Enter Insert Pause/Break Num Lock F8 / Play/Pause F9 / Fast Forward F10 / Mute F11 / Volume Down F12 / Volume Up CD Eject Delete Forward F13 F14 End Page Up Page Down Delete Backward Return Fn F15 Clear Mac Keyboard Key Functions Control Option Command ESC F1 / Brightness Down
F13 F14 F15 F16 F17 F18 F19 Return CD Eject Delete Forward Delete Backward Fn Home End Clear Page Up Page Down Print Screen Scroll Lock Pause/Break Enter F13 F14 F15 F16 F17 F18 F19 Return Delete Backspace Insert Home End Num Lock Page Up Page Down Delete Forward Delete Backward Fn Home End Clear Page Up Page Down Return Delete Forward Delete Backward Clear Bluetooth Pairing Clearing Bluetooth allows you to remove the current Bluetooth pairing and create a new one.
To reconnect Bluetooth: 1. Select the GKMB01 port for your iPad/iPhone. 2. From the iPad/iPhone turn Bluetooth On. 3. Press any key on the USB keyboard (Bluetooth will automatically connect). Default Reset Resetting clears all settings on the GKMB01. To reset the GKMB01 back to the factory default configuration: 1. From the USB keyboard connected to the GKMB01, press: 2. All settings are now set back to the original factory default configuration. Firmware Upgrade To upgrade the GKMB01’s firmware: 1.
Safety Instructions Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the device. Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. Do not use the device near water. Do not place the device near, or over, radiators or heat registers. The device cabinet is provided with slots and openings to allow for adequate ventilation.
The device exhibits a distinct change in performance, indicating a need for service. The device does not operate normally when the operating instructions are followed. Only adjust those controls that are covered in the operating instructions. Improper adjustment of other controls may result in damage that will require extensive work by a qualified technician to repair.
Customer Service Need help setting up this product? We’re here to help you! Make sure to: 1. Visit www.iogear.com for more product information 2. Visit www.iogear.com/support for live help and product support Limited Warranty This product carries a 3 Year Limited Warranty. For the terms and conditions of this warranty, please go to http://www.iogear.com/support/warranty Register online at http://www.iogear.
manual revision 1.
