Quick Start Guide Bluetooth Desktop Dock GKMB01 PART NO. Q1220 www.iogear.
1 Package Contents 1 x Bluetooth Desktop Dock main unit 1 x Device back support 1 x Quick Start Guide 1 x Warranty/Registration Card System Requirements: - Mobile Devices: Support Bluetooth HID profile* - iOS Devices: iOS 4.2 and up - Android Devices: 3.0 and up - Computer: With minimum 1 type A USB port; Windows 2000 and up & Mac OS 10.
2 Hardware Installation STEP 3 STEP 2 STEP 1 STEP 2 STEP 1 Plug the Bluetooth Desktop Dock’s USB cable into the computer. If it is the first time install, please allow a few seconds for the computer to load the drivers. STEP 2 Unplug the USB keyboard and mouse from the computer, and plug them into the Bluetooth Desktop Dock. Perform a quick test by typing a few words to make sure the keyboard and mouse work fine with the computer.
Bluetooth Pairing 3 STEP 1 To connect a Bluetooth mobile device, choose either port #2 or port #3 by pressing either “ALT+F2” for port #2 or “ALT+F3” for port #3. STEP 2 Using port 2 as an example, you should see the LED #2 flashing at the front of the Bluetooth Desktop Dock, indicating the unit is searching for other Bluetooth devices to connect. STEP 3 Using iPad as an example of the mobile device, select Settings from the home screen of iPad, then select General, and turn on the Bluetooth.
4 With Bluetooth turned on, the iPad will search for the surrounding Bluetooth devices, you should see GKMB01 as one of the Bluetooth devices in the range. You can see that GKMB01 is not paired with the iPad. STEP 5 Select GKMB01, a message will appear on the iPad screen with the PIN code. Type the Pin code on the keyboard and press Enter. You should see your iPad is connected to the GKMB01.
Operation 5 GKMB01’s default connection is to port 1, which is the computer port. To switch to port 2 to type on the mobile device wirelessly connected to port via Bluetooth, type “ALT + F2”, you can see the LED flashes then turns solid, the keyboard should work on that mobile device now. To switch to port 3, type “AlT+F3”, you can see the LED #3 flashes then turns solid, the keyboard should work on that port. To switch back to the computer, type “ALT+F1”.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential setting. This product generates, uses, and can radiate radio frequency energy and, if not installed and used as directed, it may cause harmful interference to radio communications.
Limited Warranty WE’RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP THIS PRODUCT? Make sure you: 1. Visit www.iogear.com for more product information 2. Visit www.iogear.com/support for live help and product support Warranty Information This product carries a 3 Year Limited Warranty. For the terms and conditions of this warranty, please go to http://www.iogear.com/support/warranty Register online at http://www.iogear.
