User Guide

SSID: The Service Set ID. This should be set to the

same value as other wireless devices in your

network. (Default: ANY)

Channel Number: The radio channel through which

the Print Server communicates.

Data Transmit Rate: Set the rate of data transmitted

from the Print Server. The lower the data rate, the

longer the transmission distance. (Default: 1,2,5.5,11

MBPS.)

WEP Encryption: Displays the WEP encryption

status.

TCP/IP Status

TCP/IP Status displays the TCP/IP settings of the

wireless printer server.

Wireless Status

Wireless Status displays the wireless settings of the

wireless print server.

Mode: Set the station operation mode to 802.11 Ad-

Hoc for network configurations that do not have an

access point, or to Infrastructure for configurations

with an access point (Infrastructure is the default

setting.)

AP’s MAC Address: Displays the MAC address of the

Print Server.

Web Based Configuration