Installation Guide Wireless USB to VGA Adapter 1 GUW2015V PART NO.
Table of Contents System Requirements 4 Frequently Asked Questions 25 Important Information 5 Technical Specifications 26 Package Contents 6 Limited Warranty 28 Device Overview 7 29 Wireless USB VGA Software Installation 9 Federal Communications Commission (FCC) Statement Cable Association with the Wireless USB Enabled PC 12 Contact 30 Connecting Wireless USB VGA Adapter 16 Wireless USB VGA Display Settings 19 Wireless USB VGA Adapter in wired mode 24 3
System Requirements - Microsoft Windows® XP 32-bit (Service Pack 2) - Microsoft Windows® Vista® 32/64-bit - Minimum CPU requirement: 2GHz (single core), memory: 1GB* - Wireless USB enabled PC (embedded or via Wireless USB Host Adapter) - USB 2.0 Compliant hardware and system - Display with VGA port (VGA cable not included) * In order to support 720p video, minimum system requirements CPU: 2GHz (single core), RAM: 1GB.
Important Information Before you get started, please NOTE: Do not place Wireless USB devices under direct sunlight or near high heat emitting devices; Do not place Wireless USB devices near water or wet surfaces to avoid electric hazards; Do not place Wireless USB devices on any moving or unstable surfaces.
Package Contents 1 x Wireless USB to VGA Adapter (for Monitor/TV/Projector) 1 x USB 2.0 A to mini-B Cable (3 ft.
Device Overview Wireless VGA Adapter 1 2 4 5 6 7 7 3 8
4. PWR plug a. Power adapter socket Wireless VGA Adapter 1. VGA : VGA Activity Indicator 5. RESET a. Association history can be erased by pressing and holding this button for 10 seconds a. LED is solid when display cable is connected b. LED is blinking when data is being transferred 6. HOST a. This button is used to select a different Wireless USB Host Adapter 2. PWR: Power Indicator a. LED is solid when power is applied 3. 1 – 2 – 3: Status Indicator a.
Wireless USB VGA Software Installation Please always check www.iogear.com for latest drivers. IMPORTANT NOTE: If installing on Windows XP, Service Pack 2 (SP2) is required, verify that this has been installed on your PC before installing the Wireless USB VGA Adapter software. Before installing the GUW2015V software, please make sure that the Wireless USB VGA Adapter is not connected to the computer, and the Wireless USB VGA Adapter is not powered. Step 1 – Insert installation CD into drive on your computer.
Step 3 – Choose installation method. The next screen will let you choose whether you want to install the latest software from the IOGEAR website or if you want to install the software directly from the installation CD.
If selecting Option 2: Download latest software installer from the Web, a web browser window will launch directing you to the IOGEAR website where you’ll find the most up-to-date software. Once you download the software, double-click on the .exe file to begin the installation process. If selecting Option 1: Install directly from CD, the installation will start automatically. Important: After the wizard has finished installing the software, reboot your computer if prompted to do so.
Cable Association with the Wireless USB Enabled PC In order to establish a secure wireless connection between the Wireless USB enabled PC and the Wireless USB VGA Adapter, you will need to go through the cable association process. If you have a removable Wireless USB host adapter, please make sure it is plugged in now. To start, plug the power cable into the Wireless USB VGA adapter.
Then use the included USB 2.0 A to mini-B cable to connect the Wireless USB VGA Adapter to your PC.
Windows will detect that a new device has been connected. This will automatically install the necessary drivers and start the Wireless USB Association process. Once the association process has been successfully completed, you will see the wireless connection status showing Association Successful. (Wording may vary depending on which software comes with your Wireless USB Host adapter). Click OK to close the window. After completing the association process, unplug the USB 2.
The host adapter manager utility will display the Wireless USB VGA icon which shows the status link (signal strength ) when connected. If the Wireless USB VGA adapter is not connected, then the Wireless USB VGA icon will be grayed out. Illustration on the right is for your reference. Please note, your host adapter manager utility may vary depending on which host you are running with the Wireless USB VGA adapter. Congratulations, your Wireless USB to VGA Adapter is ready for use.
Connecting Wireless USB VGA Adapter Please make sure the PC is Wireless USB enabled either with embedded Wireless USB solution or with the Wireless USB Host Adapter plugged in before you connecting the Wireless USB VGA Adapter. Verify that the antenna on the Wireless USB VGA adapter is securely attached and pointed in a vertical position. Connect one end of the VGA cable (not included) to the Wireless USB VGA Adapter, and the other end to your display’s blue VGA port.
For LCD Monitor/ Flat-Panel TV For Projector 17
You may use the included Velcro® fabric hook-and-loop fastener to attach the Wireless USB VGA adapter to your projector or LCD display in order to ensure a good line-of-sight signal with the Wireless USB Host adapter. Change your display’s setting to select VGA as your input device. Please refer to the operating instructions supplied with your display.
Wireless USB VGA Display Settings By default, the display monitor connected to the Wireless USB VGA adapter will be set to the best resolution and will extend your screen to the right. You may change the screen mode and the operation mode by double clicking on the Monitor icon in the Windows system tray. A menu will appear and you will have the ability to change parameters such as resolution, color quality, mirror mode or extension mode and more.
as shown above, another is to go to Control Panel, double click on “Display”, then choose “Settings” tab. Video Mode Configuration By default, your installation will be set with the best resolution for your computer and will extend your screen to the right. You may change the screen mode and the operation mode. Mirror Mode Mirror mode duplicates the primary display to the monitor connected to the Wireless USB VGA Adapter.
To set up the Wireless USB VGA Adapter to mirror the primary display: 1. Go to the “Settings” tab of the Display Properties page 2. Click on the Monitor connected to the “IOGEAR Wireless USB VGA adapter” 3. Ensure that “Extend my Windows desktop onto this monitor” is Unchecked 4.
Extended Mode Extended mode extends the desktop across multiple monitors. To set up extended mode: 1. Go to the “Settings” tab of the Display Properties page 2. Click on the Monitor connected to the “IOGEAR Wireless USB VGA adapter” 3. Ensure that “Extend my Windows desktop onto this monitor” is checked 4. Click “Apply” The orientation of the screens can also be adjusted by dragging the location of the blue screens to match the actual physical layout.
Screen Refresh Rate Configuration To adjust the refresh rate of the extended screen, click on “Advanced” and then the “Monitor” tab.
Wireless USB VGA Adapter in Wired Mode Your Wireless USB VGA Adapter can also be used in wired mode. Make sure the position of the WIRED/ WIRELESS switch is in the WIRED position. Plug the USB cable between your computer and the Wireless USB VGA Adapter. The function is the same as the wireless mode but data will be transferred through the cable and does not require the use of the Wireless USB Host Adapter.
Frequently Asked Questions For the latest FAQs, please go to IOGEAR website (www.iogear.com). 1. My Wireless USB Host Adapter is plugged into my computer and my Wireless USB VGA Adapter is powered but I do not see anything on my display. What’s wrong? Check the host adapter manager utility provided by your Wireless USB Host Adapter (PC side) to see if there is an icon for your Wireless USB VGA Adapter.
Technical Specifications Specifications Function GUW2015V Operating System Support Microsoft XP 32-bit; Microsoft Vista 32/64-bit PHY Data Rate 53.3Mbps, 80Mbps, 106.6Mbps, 160Mbps, 200Mbps, 320Mbps, 400Mbps, 480Mbps Operating Range Up to 30 feet (10 meters) Frequency 3.1GHz to 4.
Screen Mode Extended and Mirror mode Color Depth 32-bit True Color USB Specification Certified Wireless USB 1.0; USB 2.0 Association Mode Cable Association; Stores up to 16 Associated Hosts Native Mode For playback of high resolution video Antenna Type Omni directional Reset Switch Used for erasing association history by pressing and holding this button for 10 seconds Power Consumption Wireless VGA Adapter: 3.3W Max Output Power -41.
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose.
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is authorized under 47 CFR 15.519 (the FCC Rules and Regulations).
Contact IOGEAR 23 Hubble Irvine, CA 92618 P 949.453.8782 F 949.453.8785 Visit us at: www.iogear.com © 2008 IOGEAR® Part No. M1063 IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR makes no warranty of any kind with regards to the information presented in this document.
About Us FUN IOGEAR offers connectivity solutions that are innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resources. The use of our technology solutions helps reduce electronic waste. HEALTH IOGEAR supports healthy and fit lifestyles. By integrating products with the latest scientific developments, IOGEAR’s solutions enhance the life of end-users.
