- IOGEAR Wireless Audio / Video Kit Installation Guide

1. VGA : VGA Activity Indicator

LED is solid when display cable is connected

LED is blinking when data is being transferred -

2. PWR: Power Indicator

LED is solid when power is applied

3. Status Indicator

Single* solid light: device is wirelessly connected to

the selected Wireless USB Transmitter

Single* slowly blinking light: device is searching for a

Wireless USB Transmitter

Single* quickly blinking light: device is trying to

connect to a Wireless USB Transmitter

Rapidly scrolling lights: device is used in wired mode.

Three Simultaneous Blinking Lights: Cable -

Association Mode

*Only one light at a time. The position of the light indicates

which Wireless USB Transmitter the device is trying to

communicate with.

4. VGA Connector

Connects to one end of the included VGA cable, and

the other end to the VGA or DVI port on your display

5. Power Plug

Power adapter socket

6. RESET Button

Association history can be erased by pressing and

holding this button for 10 seconds. (Please visit P.54

for details)

7. HOST Button

This button is used to select a different Wireless USB

Transmitter. (Please visit P.53 for details)

8. Mini-B USB port

In wireless mode, this port is used for cable

association. (Please visit Appendix for details)

In wired mode, connect the VGA adapter with the

USB cable via this port for wired operation. (Please

visit P.55 for details)

9. WIRELESS/WIRED switch

Choose from wired or wireless mode by using this

switch - P.55