Quick Start Guide Wireless 1080p Computer to HDTV Kit PART NO.
Package Contents 1 2 3 Start Here! 1 x Wireless A / V Receiver (device adapter + A / V base) 1 x Wireless USB Transmitter (for computer) 1 x Power Adapter 1 x HDMI Cable 1 x Quick Start Guide 1 x Warranty/Registration Card 1 x Installation CD 1 2 3 Requirements PC: • Microsoft Windows® 7, Windows Vista® SP2 or Windows® XP (32-bit) SP3 • 1.8 GHz processor (2.4GHz recommended) with 1GB RAM (3GB recommended) • 1 USB 2.
Software Installation 1. Insert the CD-ROM and follow the instructions to install the driver software. 2. A new Wireless USB icon will appear in the system tray after the installation. 3. Restart your system for the configuration changes made to fully take effect.
Transmitter Installation 1. Plug the Wireless USB Transmitter to a USB 2.0 port on your computer (the tray icon will change from Gray to Red ). 2. Please keep the Transmitter in upright position only.
Receiver Installation 1. Depending on your installation application, slide the shutter to show the USB port. 2. Insert the Device Adapter. 3. Keep Device Adapter in upright position only.
Cords and Cables 1. Connect the A / V Base using the HDMI cable or a combination of VGA and audio (3.5mm) cables (sold separately). 2. Slide in the prong changer to the AC adapter first. Connect the power cable to the Black port. Tray icon turns Green and the display icon appears. 3. Change your TV’s input source setting accordingly (HDMI or VGA). Refer to the operating instructions supplied with your TV or display.
Configuration 1. Keep your Wireless Transmitter & Receiver at Max 30 ft. within line-of-sight. 2. Now you should be able to watch the same content as your laptop’s screen on your HDTV - Mirror mode is set as default. 3. In Mirror Mode, the screen resolution is chosen automatically for both the laptop and the HDTV. For better resolution and performance, you may change the setting to Extended mode under the display icon in the system tray.
Troubleshooting General Troubleshooting Minor issues can generally be resolved by checking the following: • Make sure that the TV was set on the correct “Input” source, such “HDMI 1” • Detach and reattach the transmitter from your computer’s USB port, wait for the connection to re-establish (may take a few seconds) • Power cycle the Wireless HD receiver • Change the display mode via the Displaylink GUI, or OS’ Display Properties between “Extended” and “Mirror” mode Extended Mode (extend your desktop area)
Troubleshooting Video Playback Under the display icon in the tray • If available it is recommended to use “Optimize for Video” • Use “Extended Mode”, and lower the extended screen resolution to 720p (1280 x 720) Online Video streaming: Windows XP • Make sure to disable “Hardware Acceleration” on your Flash Player • Right click on the video you’re watching, choose “Settings” • Uncheck “Enable hardware acceleration” box Windows Vista / Windows 7 Users • Right click the desktop and select “Personalize” • Sel
Federal Communications Commission (FCC) Statement This product has been tested and found to comply with the limits for a Class B device, pursuant to part 15 of the FCC Rules. It is intended for use in residential setting, but may also be used in commercial or industrial setting. Limited Warranty WE’RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP THIS PRODUCT? Make sure you: 1. Use the live chat at www.iogear.
A / V Base Mounting Template For your convenience, you may use this drill template for easy marking of hole positions for mounting the A / V base. Please make sure the chosen screws / fixtures are suitable for use in the wall to which they are to be attached.
About Us FUN IOGEAR offers connectivity solutions that are innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resources. The use of our technology solutions helps reduce electronic waste.
