Quick Start Guide Wireless 3D Digital Kit GW3DHDKIT Part No.
Package Contents 1 x Wireless 3D Transmitter 1 x Wireless 3D Receiver 1 x Remote Control POWER IR INFO SOURCE 1 x IR Blaster Cable 2 x Power Adapter Round connector for Transmitter 1 x HDMI Cable USB connector for Receiver 2 x Battery (AAA) 1 x Quick Start Guide 1 x Warranty / Registration Card Product Specifications General Specifications Supported Video HDMI Resolutions Input Supported Audio Digital Formats Audio 1080p, 1080i, 720p, 576p, 480p Up to 6 Mbps AC3 and DTS Transmission Distance
Device Overview Front Transmitter Receiver 3 1 2 2 1 3 4 1. Source Indicator - The solid blue LED indicator shows the active media source 2. Source Selection Button - Press to switch media source of the transmitter 3. Power Button with LED Indicator - Press to turn the transmitter on or off 4. IR Sensor - See IR Blaster section for details Back Transmitter 1 2 Receiver 3 4 5 6 7 1. Tripod Bracket 2. DC - Power adapter socket 3. HDMI 1 - HDMI media source 1 4. HDMI 2 - HDMI media source 2 5.
Installation Before you begin the installation: • Turn off your TV and all HDMI devices. Ensure you have enough HDMI cables for all devices and there are enough electrical outlets nearby to power all of your devices. • Position your Transmitter and Receiver up to 100 feet away from each other*. Test the placement for a good signal prior to permanently installing or mounting everything. • For best performance and range, place the receiver where you have a clear view between the Transmitter and Receiver.
IR Blaster (Optional) The Receiver can also send RF signals to the Transmitter. This means that you do not have to point your remote control at your devices as you may be watching TV in a different location. Simply point your device’s remote control at the Receiver side and the Transmitter sends IR commands to other devices allowing you to control your Blu-ray player or settop box remotely. HDMI 1. Plug the IR blaster cable into the IR OUT port of the transmitter. 2.
EDID Management EDID (Extended Display Identification Data) is the data provided by digital displays to indicate their capabilities to video sources. The Wireless 3D Digital Kit distributes HDMI signals from your video source to two HDMI displays. In order to deliver the best audio and video formats supported by both TVs, the kit reads the EDID information from both displays and determines the “Best Common” video resolutions and audio format to send to the video source to program EDID on the device (i.e.
Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential setting. This product generates, uses, and can radiate radio frequency energy and, if not installed and used as directed, it may cause harmful interference to radio communications.
About Us FUN IOGEAR offers connectivity solutions that are innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resources. The use of our technology solutions helps reduce electronic waste.
