User's Manual

Configuration Utility
Log Setting
This page support two methods to export system
logs to specific destination by means of
syslog(UDP) and SMTP(TCP). The items you have
to setup including:
IP Address for Syslogd
Host IP of destination where syslogs will be sent to.
Check Enable to enable this function.
E-mail Alert Enable
Check if you want to enable Email alert(send syslog
via email).
SMTP Server IP and Port
Input the SMTP server IP and port, which are
concated with ‘:’. If you do not specify port number,
the default value is 25.
For example,”192.168.1.100:26".
66