Quick Start Guide

Hardware Installation

Step 1: Setup the Wireless HDMI Transmitter

1. Power on your PC or media source (Bluray, Sattelite box, etc.)

2. Power the transmitter through one of two options:

a. If used with a Blu-Ray player or similar device, connect the

Wireless HDMI Transmitter to the USB power adapter first,

then plug the transmitter’s HDMI connector into the Blu-Ray

HDMI output port.

b. If used with a computer, connect the Mini USB connector of

the power cable to the transmitter’s Mini USB port and USB-A

connector (the other end of the power cable) to the USB port

on the computer.

3. Connect the Wireless HDMI Transmitter to the HDMI output port

of the computer or media source.

4. The LED will start to flash to start the pairing process, once

paired the LED will turn solid. Please note that this process could

take up to 1 minute.

HDMI

USB