User Guide

Remove Transmitter:
→ GWHD11
→ GWHDSTX
 Return
1. Press the Transmitter No. button. The OSD will show a list of
transmitters linked to the receiver.
2. Use the Up / Down buttons to select the transmitter you want to
display on your HDTV / HD projector. Then press OK and allow
~10-12 seconds for the receiver and transmitter to re-establish
a connection.
1. Press Transmitter No. to display the list of linked transmitters.
3. Select Remove Transmitter option.
4. Use the Up / Down arrow buttons to select the transmitter to
be removed and press OK.
2. Select SETUP menu by using the Up / Down buttons;
press OK to select.
5. Then use the Up / Down buttons on the remote to select
alphanumeric characters; use the Left / Right buttons on the
remote to move the cursor; Press IR button to backspace.
Removing a Paired Transmitter
Select Transmitter Number:
→ GWHD11
→ GWHDSTX
SETUP
SETUP:
→ Add New Transmitter
→ Remove Transmitter
→ Modify Transmitter Name
Select Transmitter Number:
→ GWHD11
→ GWHDSTX
SETUP
 Return
9