Quick Start Guide Wireless Video Kit, 150 Feet Range, One to One HDMI, up to 1080P GWHDKIT11 PART NO. Q1492 www.iogear.
Package Contents 1 1 x HDMI Extender Transmitter 1 x HDMI Extender Receiver 1 x IR Blaster Extension Cable 1 x IR Receiver Extension Cable 2 x Antennas 2 x 5 VDC/2A Wall Mount Switching Power Supply 1 x Quick Start Guide System Requirements 1 HDMI source device (DVD, PS3, Set top box, PC etc.) 1 HDMI display device (SDTV, HDTV, projector with HDMI port, etc.
2 Overview Transmitter A. Power input B. HDMI signal indicator C. Wireless signal indicator D. HDMI input E. IR Blaster extension cable connector F. Antenna connector F E A B C D Receiver A. Power input B. Data transmission indicator C. Wireless connection indicator D. HDMI output connector E. IR receiver extension cable connector F.
3 Hardware Installation STEP 1 Install the antenna to the transmitter (F) STEP 2 Connect the IR blaster cable to the connector (D) 1 2 STEP 3 Connect one side of the HDMI cable to the transmitter (D) and the other side to your video source
4 Hardware Installation STEP 4 Install the antenna to the receiver (F) STEP 5 Connect the extension cable to the connector (E) 1 2 STEP 6 Connect one side of the HDMI cable to the receiver (D) and the other side to your video source
Hardware Installation 5 STEP 7 Connect 5VDC/2A power supply to the Transmitter power input port (A), the HDMI signal indicator (B) will light up when connection to the source is established STEP 8 Connect 5VDC/2A power supply to the Receiver power input port (A) STEP 9 Wireless connection indicator of the transmitter and receiver will light up when the transmitter and receiver connection is established wirelessly If your video source and your display is on, you should be able to see the content of the s
FAQ 6 Q Transmitter and receiver cannot be connected wirelessly A 1. Please check if the wireless connection light is on and blinking 2. Restart both transmitter and receiver 3. Reconnect HDMI cables Q The wireless indicator is on but no signal to the display A Please check and see if the video source is working correctly by connecting the HDMI cable directly to the display and see if the operation is now normal Q Video is flickering or not stable A 1.
Compliance Information FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential setting. This product generates, uses, and can radiate radio frequency energy and, if not installed and used as directed, it may cause harmful interference to radio communications.
