User's Manual

USER’S MANUAL OF WLAN BROADBAND ROUTER Version: 1.0
28
IP Address
If you select the Set Static DHCP on LAN interface, fill
in the IP address for it.
MAC Address
If you select the Set Static DHCP on LAN interface, fill
in the MAC address for it.
Comment
Fill in the comment tag for the registered Static DHCP.
Apply Changes
Click the Apply Changes button to complete the new
configuration setting.
Reset
Click the Reset button to abort change and recover the
previous configuration setting.
Static DHCP List
It shows IP Address、MAC Address from the Static
DHCP.
Delete Selected
Click to delete the selected clients that will be removed
from the Static DHCP list.
Delete All
Click to delete all the registered clients from the Static
DHCP list.
Reset
Click the Reset button to abort change and recover the
previous configuration setting.
3.3.12 WAN Interface Setup
This page is used to configure the parameters for wide area network that
connects to the WAN port of your WLAN Broadband Router. Here you may
change the access method to Static IP, DHCP, PPPoE, PPTP or L2TP by
click the item value of WAN Access Type.