User's Manual

USER’S MANUAL OF WLAN BROADBAND ROUTER Version: 1.0
50
Item
Description
Enable Dynamic Route
Click to enable the Dynamic Router function.
NAT
Click to enable or disable the NAT function
Transmit
Click to disable or RIP1, RIP2 the Transmit function.
Receive
Click to disable or RIP1, RIP2 the Transmit function.
Enable Static Route
Click to Enable the Static Router function
IP Address
Subnet Mask
Default Gateway
Manually Specify the packets arrive at the destination.
The internal network can be avoided through the Internet
of the packet exchange.
Metric
Fill in the Metric value. The default value is empty.
Interface
Click to select LAN or WAN interface.