User's Manual

ManualsBrandsIOGEAR ManualsComputers & AccessoriesRF 2.4G Keyboard

IogearRF2.4GKeyboardUser’sManual

Thank you for your purchase of our iogear RF 2.4G Keyboard. For your own

safety and convenience, please read this manual thoroughly before using this

product. After you have read this manual, please keep it in a place for

reference when necessary.

Contents in the package

These following items are included in the package. Please make sure all items

are complete when open the package at first time. If there is any item missing

or damaged, please contact the reseller where the product was purchased or

our support center.

 Iogear RF 2.4G Keyboard x 1

 Manual x 1

 USB receiver x1

 AA Alkaline batteries x2

Installation Procedure

A. Setting up the Dongle Receiver

1. Plug the dongle receiver into an available USB port.

2. Wait for operating system to install drivers for the dongle receiver, keyboard

and mouse.

B. Setting up the Keyboard and Mouse

1. Open the keyboard’s battery compartment cover and insert the two pieces

of AA Alkaline batteries. Make sure they are properly installed.

2. Open the top cover, the power will be turned on automatically.

3. Usually the keyboard and mouse have bound in the factory, and it can be

used after inserting batteries. If the keyboard and mouse cannot be

recognized from system, please follow steps below.

4. Press the ID button of receiver and the LED light will start to blink.

5. Press the RESET button of keyboard and the LED light will stop blinking.

6. If the keyboard and mouse cannot be connected after setting, please

repeat the steps 4~6 to reset the ID button.

Battery Low

Summary of content (6 pages)

PAGE 1
Iogear RF 2.4G Keyboard User’s Manual Thank you for your purchase of our iogear RF 2.4G Keyboard. For your own safety and convenience, please read this manual thoroughly before using this product. After you have read this manual, please keep it in a place for reference when necessary. Contents in the package These following items are included in the package. Please make sure all items are complete when open the package at first time.
PAGE 2
1. Built in LED light for low power indicator. Low-Battery is indicated by the illumination of the LED light, which is located on the top-left. Please replace the battery when the LED lights up. 2. While the keyboard is entered sleep mode, please press any keyboard button or mouse button to wake it up. 3. We recommend using alkaline batteries for the keyboard. 4. You may need to reset the keyboard connection status after replacing new batteries for the keyboard. Attention ATEN Technology Inc.
PAGE 3
Front View Power Switch Battery Indicate Mouse Keys Light Sensor Trackball Scroll Wheel Trackball Resolution Media Center Keys 3
PAGE 4
Back View Backlight Switch RF Signal Reset Button Hot Key Functions Key Function Key Function mouse left Fn+Q 400DPI mouse right Fn+W 800DPI mute Fn+E 1200DPI Volume decrease Fn+J Page Up Volume increase Fn+K CH+ Pre-Track Fn+L Stop Fn+; Home ↑ Play/Pause Fn+’ END Next-Track Fn+mouse left Fn+N Page Down Fn+M Fn+, CH← ESC Fn+mute MCE Fn+.
PAGE 5
increase Fn+Pre-Track My Music Fn+Stop My Picture Fn+Play/Pause Record TV Fn+Next-Track DVD Fn+ + Home Product Features Palm size cordless mini keyboard with trackball Mouse Function and Mouse right, left button &scroll wheel functions. Stylish blue LED backlight keys. Automatically backlight adjust. Connect your HTPC to control Windows Media Center friendly. Built in 7 multimedia keys: Skip back, Skip forward, Play/Pause, Stop, Mute, Volume up, Volume down, WWW.
PAGE 6
Power Consumption DC 5V ± 5%, Safety Approval FCC Class B, CE Operation System Windows 2000 / XP / XP x64 / Vista x86 x64 /7 x86 x64 Accessory USB Receiver FCC Statement on CLASS B This equipment has been tested and found to comply with the limits foe a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.