Installation Guide Wireless USB Host Adapter 1 GUWA200 PART NO.
Table of Contents System Requirements 4 Important Information Package Contents Frequently Asked Questions 18 5 Technical Specifications 20 6 Limited Warranty 21 Device Overview 7 22 Installation 8 Federal Communications Commission (FCC) Statement Software Installation 9 Contact 23 Connecting Wireless USB Host Adapter 12 Appendix 24 Wireless USB Manager Wireless USB Host Adapter Settings 14 16 3 Compatibility with GUWH104KIT 24 Cable association with Wireless USB devices 25
System Requirements - Microsoft Windows® XP 32-bit (Service Pack 2) - Microsoft Windows® Vista® 32/64-bit - USB 2.
Important Information Before you get started, please NOTE: Do not place Wireless USB adapter under direct sunlight or near high heat emitting devices; Do not place Wireless USB adapter near water or wet surfaces to avoid electric hazards; Do not place Wireless USB adapter on any moving or unstable surfaces.
Package Contents 1 x Wireless USB Host Adapter (for PC) 1 x USB 2.0 Extension Cable (5 ft.
Device Overview Wireless USB Host Adapter 1. LINK: Data Transfer Activity Indicator a. LED blinks when data is being transferred 1 2 L IN K P W R 2. PWR: Power a.
Installation Please always check www.iogear.com for the latest drivers. IMPORTANT NOTE: If you purchase the hub kit GUWH104KIT, please refer to Appendix “Compatibility with GUWH104KIT” of this User’s Manual in the CD-ROM for important information regarding steps to perform before the installation of the Wireless USB Host Adapter.
Software Installation Notes: 1. If installing on Windows XP, Service Pack 2 (SP2) is required. Please Verify that SP2 has been installed on your PC before proceeding with the UWB installation software. 2. Microsoft .NET Framework 2.0 is required by the driver software. Once you begin the software installation, if .NET Framework 2.0 is not installed on your PC, the software will automatically prompt you to install it before proceeding to the UWB software installation.
Step 3 – The next screen will let you choose whether to install the latest software from the IOGEAR website or to install the software directly from the installation CD. By choosing Option 2: Download latest software installer from the Web, a web browser window will launch directing you to the IOGEAR website where you’ll find the most up-to-date software. Once you download the software, double-click on the .exe file to begin the installation process.
Step 4 – If you previously installed the GUWH104KIT software, then you will be prompted to remove the software from your computer. For more information, please see Appendix. Step 5 – For Windows XP users, if you do not have Microsoft .NET Framework 2.0 installed, you will be prompted to have it installed. 1. Click “Yes” to install .NET 2.0 Framework 2. Check “License Agreement” and click “Install” 3. Click “Finish” to complete installing .NET Framework 2.0 4. Restart the computer when prompted 5.
Connecting Wireless USB Host Adapter Once you connect the Wireless USB Host Adapter to your computer, its drivers will be installed automatically. There are 2 options to connect the Wireless USB Host Adapter to your computer. Option 1 Verify that the antenna on the Wireless USB Host Adapter is securely attached and pointed in a vertical position. Plug the Wireless USB Host Adapter into an available USB 2.0 port on your computer.
Option 2 If using a Desktop PC, plug the Wireless USB Host Adapter into an available USB 2.0 port utilizing the provided extension cable. Place the extension cable on a flat surface, preferably the top of the desk/ work area in order to ensure a good line-of-sight signal with your “Certified Wireless USB device”. Once the Wireless USB Host Adapter has been installed properly you will have the ability to connect to your “Certified Wireless USB device”.
Wireless USB Manager The Wireless USB Manager is a simple and easyto-use interface that allows you to manage your Wireless USB devices and control your Wireless USB Host Adapter settings. The Wireless USB Manager can be accessed via the Wireless USB Manager icon located in the Windows system tray. To launch the Wireless USB Manager, double click on the Wireless USB Manager icon. On the main pane, you will find an icon representing your “Certified Wireless USB Device”.
If your Wireless USB device is connected and working, then the icon will change and show the current signal strength. The View menu will give the option of what type of devices you wish to display (All Devices, Connected Devices and Disconnected Devices). Illustrator below is for your reference. The Options menu will give the option to launch Host Settings window and turn the Wireless USB Host Adapter radio on or off.
Wireless USB Host Adapter Settings To manage the Wireless USB Host Adapter settings, either select “Host Settings” in the “ Option” menu of the Wireless USB Manager application or right click on the Wireless USB Manager icon in the Windows tray. • General Settings 1. Enable the Wireless USB radio: turn on or off the Wireless USB radio. 2. Host name: Change the name of your Wireless USB Host Adapter. 3. Cable association connection rules: Always, Never or Ask me each time.
• Advanced Settings Channel selection: this function allows you to manually set a radio channel (not recommended) for the wireless communication (combination of Band Group and Channel). For optimal performance, the automatic setting is recommended.
Frequently Asked Questions For the latest FAQs, please go to IOGEAR website (www.iogear.com). 1. Why can’t I install .NET? You may have an older version of .net, preventing the newer one from being installed. Using Add/Remove Programs or Programs and Features on the Control Panel, uninstall any version of Microsoft .NET Framework older than version 2.0. Then install Microsoft .NET Framework from the Wireless USB Host Adapter installer. 2.
If you see an icon that is grayed out in the Wireless USB Manager, try resetting the Wireless USB device adapter by unplugging its power cord and plugging it back in. You should see the icon in the Wireless USB Manager appear in color when it is connected. Still not connected? Double check that the radio for your Wireless USB Host Adapter is Enabled in the Wireless USB Manager. Illustrator below is for your reference.
Technical Specifications Function GUWA200 Operating System Support Microsoft XP 32-bit; Microsoft Vista 32/64-bit PHY Data Rate 53.3Mbps, 80Mbps, 106.6Mbps, 160Mbps, 200Mbps, 320Mbps, 400Mbps, 480Mbps Operating Range Up to 30 feet (10 meters) Frequency 3.1GHz to 4.8GHz (WiMedia Band Group 1) Number of Channels 7 channels (3 FFI + 4 TFI) RF Modulation Type QPSK/DCM Interface USB USB Specification Certified Wireless USB 1.0; USB 2.
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose.
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is authorized under 47 CFR 15.519 (the FCC Rules and Regulations).
Contact IOGEAR 23 Hubble Irvine, CA 92618 P 949.453.8782 F 949.453.8785 Visit us at: www.iogear.com © 2008 IOGEAR® Part No. M1070 IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR makes no warranty of any kind with regards to the information presented in this document.
Appendix I. Compatibility with IOGEAR GUWH104KIT Important: To retain the functionality of both the Wireless USB Host Adapter (GUWA200) and the GUWH104KIT, you MUST follow these steps: 1. Uninstall the GUWH104KIT software by using Add/Remove Programs or Programs and Features on the Control Panel. Please select and remove “Ultrasuite with WiCenter Basic”. The Wireless USB Host Adapter (GUWA200) installer will not allow you to proceed until this software is removed. 2.
II. Cable association with Wireless USB devices Association Concept: In order to establish a secure wireless connection, between both the Wireless USB Host Adapter and the Wireless USB devices, you will need to go through the cable association process. The association process will allow the Wireless USB Host Adapter and the Wireless USB device to exchange security information about each other necessary to operate in a secured wireless mode.
4. Complete cable association by pressing the “Accept Association” button when prompted. Cable association steps: 1. Make sure that the Wireless USB Manager is running. Check your Windows tray for the Wireless USB Manager icon. Illustration below is for your reference. 2. Power on your Wireless USB device. 3. Connect the USB cable between an available USB port on your computer and your Wireless USB device.
5. Remove the USB cable from your Wireless USB device and computer then follow instructions specific to your Wireless USB device for wireless operation. Associated Wireless USB devices will appear as icons in the Wireless USB Manager. When the Wireless USB device is connected to your computer, the icon will appear in color. Illustration on the right is for your reference.
About Us FUN IOGEAR offers connectivity solutions that are innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resources. The use of our technology solutions helps reduce electronic waste. HEALTH IOGEAR supports healthy and fit lifestyles. By integrating products with the latest scientific developments, IOGEAR’s solutions enhance the life of end-users.
