Installation Guide Wireless USB to VGA Kit 1 GUW2015VKIT PART NO.
Table of Contents System Requirements 4 Frequently Asked Questions 31 Important Information 5 Technical Specifications 34 Package Contents 6 Limited Warranty 36 Device Overview 7 Federal Communications Commission (FCC) Statement 37 Contact 38 Appendix 39 Wireless USB Host Adapter 7 Wireless VGA Adapter 8 Wireless VGA Software Installation Wireless VGA Display Settings 10 19 Wireless USB Manager 24 Wireless USB Host Adapter Settings 26 Wireless USB Host Adapter Selection 28 Wi
System Requirements - Microsoft Windows® XP 32-bit (Service Pack 2) - Microsoft Windows® Vista® 32/64-bit - USB 2.
Important Information Before you get started, please NOTE: Do not place Wireless USB devices under direct sunlight or near high heat emitting devices; Do not place Wireless USB devices near water or wet surfaces to avoid electric hazards; Do not place Wireless USB devices on any moving or unstable surfaces.
Package Contents 1 x Wireless USB Host Adapter (for PC) 1 x Wireless VGA Adapter (for Monitor/TV/Projector) 1 x USB 2.0 A to mini-B Cable (3 ft.) 1 x USB 2.0 Extension Cable (5 ft.
Device Overview Wireless USB Host Adapter 1. LINK: Data Transfer Activity Indicator a. LED blinks when data is being transferred 1 2 L IN K P W R 2. PWR: Power a.
Wireless VGA Adapter 1 2 4 5 6 7 8 3 8
4. PWR plug 1. VGA : VGA Activity Indicator a. LED is solid when display cable is connected b. LED is blinking when data is being transferred a. Power adapter socket 5. RESET a. Association history can be erased by pressing and 2. PWR: Power Indicator a. LED is solid when power is applied holding this button for 10 seconds 6. HOST 3. 1 – 2 – 3: Status Indicator a. This button is used to select a different Wireless USB Host Adapter a. Single* solid light: device is wirelessly connected to 7.
Wireless VGA Software Installation IMPORTANT NOTE: If installing on Windows XP, Service Pack 2 (SP2) is required, verify that this has been installed before installing the Wireless VGA kit software. Before installing the software, please make sure that the Wireless USB Host Adapter and Wireless VGA Adapter are not connected to the computer, and the Wireless VGA Adapter is not powered. Step 1 – Insert installation CD into drive on your computer. Step 2 - Select “Software Installation” from the menu.
If selecting Option 2: Download latest software installer from the Web, a web browser window will launch directing you to the IOGEAR website where you will find the most up-to-date software. Once you download the software, double-click on the .exe file to begin the installation process. If selecting Option 1: Install directly from CD, the installation will start automatically. Step 4 –If you previously installed the GUWH104KIT software, then you will be prompted to remove the software from your computer.
Step 5 – For Windows XP users, if you do not have Microsoft .NET Framework 2.0 installed, you will be prompted to have it installed. 1. 2. 3. 4. 5. Click “Yes” to install .NET 2.0 Framework. Check “License Agreement” and click “Install”. Click “Finish” to complete installing .NET Framework 2.0. Restart the computer when prompted. Eject your CD and go to Step 1. Step 6 - Wireless VGA kit software installation procedures. 1.
Step 7 - Driver Installation for Wireless USB Host Adapter. A. Make sure the antenna is connected to the Wireless USB Host Adapter. B. Plug the Wireless USB Host Adapter to your computer via option 1 or 2. Windows will detect the device and complete the driver installation process automatically. Option 1: Plug the Wireless USB Host Adapter into any available USB 2.0 port on your computer.
Option 2: If using with a Desktop PC, plug the Wireless USB Host Adapter into an available USB 2.0 port utilizing the provided extension cable. Place the extension cable on a flat surface, preferably the top of the desk/work area in order to ensure a good line-of-sight signal with the Wireless VGA Adapter.
Step 8 - Driver Installation for Wireless VGA adapter A. Make sure the antenna is connected to the Wireless VGA adapter. B. Connect one end of the VGA cable (not included) to the Wireless VGA Adapter, and the other end to your display’s blue VGA port.
• For Projector 16
C. Plug the power cable into the Wireless VGA adapter. Make sure the Power Indicator LED is solid.
Windows will automatically install the appropriate Wireless VGA Adapter drivers. Change your display’s setting to select VGA as your input device. Please refer to the operating instructions supplied with your display. You may use the included Velcro® fabric hookand-loop fastener to attach the Wireless VGA adapter to your projector or LCD display in order to ensure a good line-of-sight signal with the Wireless USB Host adapter. Congratulations, your Wireless VGA Kit is ready for use.
Wireless VGA Display Settings To change the display settings, right click on the Monitor icon in the Windows system tray. A menu will appear and you will have the ability to change parameters such as resolution, color quality, mirror mode or extension mode and more.
as shown above, another is to go to Control Panel, double click on “Display”, then choose “Settings” tab. Video Mode Configuration By default, your installation will be set with the best resolution for your computer and will extend your screen to the right. You may change the screen mode and the operation mode. Mirror Mode Mirror mode duplicates the primary display to the monitor connected to the Wireless VGA Adapter.
To set up the Wireless VGA Adapter to mirror the primary display: 1. Go to the “Settings” tab of the Display Properties page 2. Click on the Monitor connected to the “IOGEAR Wireless USB VGA adapter” 3. Ensure that “Extend my Windows desktop onto this monitor” is Unchecked 4.
Extended Mode Extended mode extends the desktop across multiple monitors. To set up extended mode: 1. Go to the “Settings” tab of the Display Properties page 2. Click on the Monitor connected to the “IOGEAR Wireless USB VGA adapter” 3. Ensure that “Extend my Windows desktop onto this monitor” is checked 4. Click “Apply” The orientation of the screens can also be adjusted by dragging the location of the blue screens to match the actual physical layout.
Screen Refresh Rate Configuration To adjust the refresh rate of the extended screen, click on “Advanced” and then the “Monitor” tab.
Wireless USB Manager The Wireless USB Manager is a simple and easyto-use interface that allows you to manage your Wireless USB devices and control your Wireless USB Host Adapter settings. The Wireless USB Manager can be accessed via the Wireless USB Manager icon located in the Windows system tray. To launch the Wireless USB Manager, double click on the Wireless USB Manager icon. On the main pane, you will find an icon representing your Wireless VGA Adapter.
If your Wireless VGA Adapter is connected and working, then the icon will change and show the current signal strength. The View menu will give the option of what type of devices you wish to display (All Devices, Connected Devices and Disconnected Devices). The Options menu will give the option to launch Host Settings window and turn the Wireless USB Host Adapter radio on or off. The Help menu offers quick help on how to connect devices to your Wireless USB Host Adapter.
Wireless USB Host Adapter Settings To manage the Wireless USB Host Adapter settings, either select “Host Settings” in the “Option” menu of the Wireless USB Manager application or right click on the Wireless USB Manager icon in the Windows tray. • General Settings 1. Enable the Wireless USB radio: turn on or off the Wireless USB radio. 2. Host name: Change the name of your Wireless USB Host Adapter. 3. Cable association connection rules*: Always, Never or Ask me each time.
• Advanced Settings Channel selection: this function allows you to manually set a radio channel (not recommended) for the wireless communication (combination of Band Group and Channel). For optimal performance, the automatic setting is recommended.
Wireless USB Host Adapter Selection To use this button, you must purchase at least one additional Wireless USB Host Adapter (GUWA200). The additional Wireless USB Host Adapters not included in this kit will have to go through the association process before they can be used with the Wireless VGA Adapter. For more information about the association process, please refer to Appendix - Cable association with other devices .
Wireless USB Host Adapter Reset To erase all Wireless USB Host Adapters (except the Wireless USB Host Adapter included in this kit) associated* to your Wireless VGA Adapter, hold down the “RESET” button on the Wireless VGA Adapter for 10 seconds. This will cause the Wireless VGA Adapter to erase all Wireless USB Host Adapters that have been associated from its list.
Wireless VGA Adapter in Wired Mode Your Wireless VGA Adapter can also be used in wired mode. Make sure the position of the WIRELESS/WIRED switch is in the WIRED position. Plug the USB cable between your computer and the Wireless VGA Adapter. The function is the same as the wireless mode but data will be transferred through the cable and does not require the use of the Wireless USB Host Adapter.
Frequently Asked Questions For the latest FAQs, please go to IOGEAR website (www.iogear.com). 1. Why can’t I install .NET? You may have an older version of .net, preventing the newer one from being installed. Using Add/Remove Programs or Programs and Features on the Control Panel, uninstall any version of Microsoft .NET Framework older than version 2.0. Then install Microsoft .NET Framework from the Wireless VGA kit installer. 2.
If you see an icon that is grayed out in the Wireless USB Manager, try resetting the Wireless VGA Adapter by unplugging its power cord and plugging it back in. You should see the icon in the Wireless USB Manager appear in color when it is connected. Still not connected? Double check that the radio for your Wireless USB Host Adapter is on in the Wireless USB Manager.
3. Why is my video choppy? If you are experiencing choppy video, try changing the channel or move in your computer closer to the display.
Technical Specifications Specifications Function GUW2015VKIT Operating System Support Microsoft XP 32-bit; Microsoft Vista 32/64-bit PHY Data Rate 53.3Mbps, 80Mbps, 106.6Mbps, 160Mbps, 200Mbps, 320Mbps, 400Mbps, 480Mbps Operating Range Up to 30 feet (10 meters) Frequency 3.1GHz to 4.
Screen Mode Extended and Mirror mode Color Depth 32-bit True Color USB Specification Certified Wireless USB 1.0; USB 2.0 Association Mode Pre-Association and Cable Association; Stores up to 16 Associated Hosts Native Mode For playback of high resolution video Antenna Type Omni directional Reset Switch Used for erasing association history by pressing and holding this button for 10 seconds Power Consumption Wireless USB Host Adapter: 1.2W; Wireless VGA Adapter: 3.3W Max Output Power -41.
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose.
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is authorized under 47 CFR 15.519 (the FCC Rules and Regulations).
Contact IOGEAR 23 Hubble Irvine, CA 92618 P 949.453.8782 F 949.453.8785 Visit us at: www.iogear.com © 2008 IOGEAR® Part No. M1062 IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR makes no warranty of any kind with regards to the information presented in this document.
Appendix I. Compatibility with IOGEAR GUWH104KIT Important: To retain the functionality of both the Wireless VGA kit and the GUWH104KIT, you MUST follow these steps: 1. Uninstall the GUWH104KIT software by using Add/Remove Programs or Programs and Features on the Control Panel. Please select and remove “Ultrasuite with WiCenter Basic”. The Wireless VGA kit installer will not allow you to proceed until this software is removed. 2.
II. Cable association with other devices Association Concept: In order to establish a secure wireless connection, between both the Wireless USB Host Adapter and the Wireless USB devices, you will need to go through the cable association process. The association process will allow the Wireless USB Host Adapter and the Wireless USB device to exchange security information about each other necessary to operate in a secured wireless mode.
Cable association steps: 1. Make sure that the Wireless USB Manager is running. Check your Windows tray for the Wireless USB Manager icon. 2. Power on your Wireless USB device. 3. Connect the USB cable between an available USB port on your computer and your Wireless USB device. 4. Complete cable association by pressing the “Accept Association” button when prompted. 5.
Associated Wireless USB devices will appear as icons in the Wireless USB Manager. When the Wireless USB device is connected to your computer, the icon will appear in color.
About Us FUN IOGEAR offers connectivity solutions that are innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resources. The use of our technology solutions helps reduce electronic waste. HEALTH IOGEAR supports healthy and fit lifestyles. By integrating products with the latest scientific developments, IOGEAR’s solutions enhance the life of end-users.
