User Guide

46
Cleaning Read/Write Head
After approximately every twenty-five hours of operation, clean the
read/write head with a foam swab (do not use a cotton swab)
moistened in pharmaceutical grade isopropyl alcohol (make sure that
the alcohol has no additives such as lanolin). Push open the tape
access door, locate the head, and wipe the head up and down (not
sideways) as illustrated below using very light pressure.
Wipe Only
Up and Down
Read/Write Head
Caution: No other maintenance procedures are authorized by Iomega.
Attempting to service the drive in any other way will void the warranty.
(NEVER touch the read/write head or any other internal part of the drive
with your fingers.) QIC-80 cleaning cartridges are NOT compatible
with QIC-3020 Travan drives and will damage the read/write head.