User Guide

9
Special Information for
Windows 95 Users
How to Install or Reinstall Iomega Software
To install Iomega software, you need both the 100MB “tools” disk that
came with your system and the Iomega Install diskette for Windows 95.
You may need to run Setup.exe twice from the Install diskette – once to
install drivers for the Zip ATAPI drive, the second time to install Tools 95
software.
M Reinstalling Windows 95: If you reinstall Windows 95, you must
also reinstall Iomega Tools 95 software. If you do not reinstall the
Iomega software, your system will not have the drivers needed for you
to use the Zip ATAPI drive. M
1. Insert the 100MB “tools” disk into the Zip drive.
2. Insert the Iomega “Install” diskette for Windows 95 into the
computer’s floppy drive.
3. Click the Start button on the Windows 95 Desktop and choose Run.
4. Type a:\Setup in the command line dialog box (or use browse to select
Setup.exe from the Install floppy diskette).
5. Click OK to start the Setup program.
6. If Setup restarts the system before completing the Tools installation,
rerun the Setup program after Windows 95 restarts.
7. Follow the on-screen instructions to install the Tools 95 software
package.
Changing Drive Letters under Windows 95
To assign a specific drive letter to the Zip ATAPI drive under Windows 95,
use the following procedure:
1. Right mouse click on the icon for My Computer and select
"Properties."
2. Click on the "Device Manager" tab.
3. Click the plus sign ( + ) next to "Disk drives," then click on the icon
for the Zip ATAPI drive to select it.
4. Click on the "Properties" button located at the lower left of the Device
Manager window.
5. Click on the "Settings" tab.
Info for Win 95
Continued on the next page …