User's Manual

Manually Configuring the Network
You can have direct control of the network setup.
1. Click
Modify Network Settings.
2. Uncheck Automatically configure DNS, WINS, and all IP addresses (DHCP).
3. DNS Servers — enter the IP addresses of the DNS (Domain Name System) servers. DNS is used for translating the domain name to IP addresses.
4. WINS Servers — enter the IP addresses of the WINS server.
5. Click Apply to save your settings.
If a DHCP server is unavailable for a network interface card (NIC), the device could auto-assign an IP address, or you can uncheck the Automatically
acquire network address (DHCP) checkbox found in the Information section of a NIC.
6. The following are settings you can change in the Information section:
IP Address — the static IP address of the Iomega StorCenter ix2-200. An unused IP address from within the range used by the LAN should be
used.
If you are going to use Remote Access, it is recommended to use a static IP address for a NIC.
Subnet Mask — the subnet that the IP address belongs to. The default value is 255.255.255.0.
Gateway — the gateway IP address needs to be entered in this field.
7. Click Apply to save your settings.
82 Iomega StorCenter ix2-200