User guide

Adding a Storage Pool
1. On the Drive Management page, click Add Storage Pool.
2. In the Information section, enter a name for the pool.
3. To change the protection, choose a value from the drop-down menu:
Mirror Stripe (RAID 10)
Uses half of the storage space for protection, leaving half for actual data.
Parity (RAID 5)
Uses 1/4 of the storage space for protection, leaving 3/4 for actual data.
Double Parity (RAID 6)
Combines six or more drives in a way that protects data against loss of any two drives.
4. Check Use as default folder location to allow automatically created Shares to be placed in this pool. Normally, all Shares are placed in a pool when
created.
5. Select the checkbox of the drive you want to add to the pool. All drives in a pool must be the same size.
6. Click Apply to add the new Storage Pool.
32 Iomega StorCenter px12-350r