User guide

Bonding NICs
Bonding network interface cards (NICs) is a way for you to provide redundancy for your Iomega StorCenter px12-350r on the network. If one NIC should fail,
your Iomega StorCenter px12-350r will remain accessible on the network if that NIC is bonded to others. You can bond two or more network interface cards
(NICs) in your Iomega StorCenter px12-350r by selecting the NICs and clicking Apply. You cannot bond wireless NICs.
Use the following procedure to bond NICs.
1. On the Network page, expand the NIC number and then expand the Bond Network Interface section.
2. Check the checkboxes next to the NICs that you want to bond to the selected NIC. For example, if you selected NIC 1, and your configuration includes
four NICs, you could bond NIC 1 to NIC 2, 3, and/or 4.
3. Click Apply to save your settings.
The section updates and displays the NICs that are bonded to the selected NIC.
Unbonding NICs
1. To unbond a NIC, uncheck next to the bonded NIC.
2. Click Apply to save your settings.
86 Iomega StorCenter px12-350r