User guide

Securing Your Device and Contents

6. Uncheck Read to remove all access to a Share and remove the Share from the table. If iSCSI is

enabled, uncheck Read to remove all access to an iSCSI drive and remove the iSCSI drive from

the table.

7. Click Apply to save your changes.

8. If NFS is enabled, the GID field is visible. The GID value must be the same on both the Linux

client and the px2-300d for the client to access files. To modify the GID, type a new GID value.

Setting Quotas

1. Click Quota settings to enable quotas and set a default quota. Quotas are only set for

individual users, and not groups.

2. In the Quota Settings dialog, click Enable quotas to turn on quotas for each user. Quotas can

be set for each user individually or set as a default value.

3. Enter a Default Quota in gigabytes. When you set a default quota, this becomes the quota size

for all new users.

4. Check Set default quota for all users to globally set the same quota size to all users. You may

overwrite this default value for individual users by setting their quota size separately in the

user's Information section.

5. Click Apply to save your changes.