User guide

Iomega StorCenter px2-300d User Guide
10
Naming Your Iomega StorCenter px2-300d
You can provide a meaningful name for your px2-300d using the Device Identification page. This
page in the Iomega StorCenter px2-300d Console enables you to change the Storage Device Name,
the Storage Device Descriptive Name, and the Workgroup Name.
Change any of these by editing the text fields. Click Apply to save your changes.
Device Name
Enter a name for the Iomega device. Use a name that will help you identify it on your network.
Device Descriptive Name
Enter a descriptive name for the Iomega device device. This name can provide additional detail that
identifies the device.
Workgroup Name
Enter a workgroup name for the Iomega device if you need to change the default name. The
workgroup name identifies a group of computers that share information with each other. Change the
workgroup name only if you explicitly define a workgroup on your network. Most users won't need to
change the workgroup name, unless they have explicitly defined a different workgroup on their
other computers.
How do I...
enable security